Purpose
Purpose-built spud and surface-hole systems (including spacers and pills) to build filter cake fast, control fluid loss, and stabilize near-surface formations for clean casing runs.
Options
Custom blends for shallow and intermediate hole conditions
Spacer and pill systems for water- or oil-based applications
Outcome
Improved hole stability, reduced losses, and cleaner casing installation for a solid start to every well.
SDS/TDS: Available on request →
Purpose
Provide viscosity and gel strength for effective cuttings transport and wellbore support in water-based muds.
Options
API-grade and high-yield bentonite selections
Optimized blends for rheology and suspension control
Outcome
Stable wellbore conditions, minimal formation invasion, and consistent fluid performance across drilling intervals.
SDS/TDS: Available on request →
Purpose
Stabilize oil- and water-based emulsion systems (OBM, SBM, WBM) for predictable rheology, improved lubricity, and dependable high-temperature, high-pressure performance.
Options
Primary and secondary emulsifiers for OBM/SBM systems
Additives for invert and direct emulsions with controlled rheology
Outcome
Stronger emulsion stability, smoother drilling, and reduced torque and drag under demanding conditions.
SDS/TDS: Available on request →
Purpose
Control microbial activity in water-based fluids to prevent fermentation, H₂S generation, and viscosity loss—protecting both equipment and fluid properties.
Options
Fast-acting and long-term preservatives for surface or downhole application
Compatible with most water-based drilling systems
Outcome
Cleaner systems, longer fluid life, and consistent performance in challenging environments.
SDS/TDS: Available on request →
Purpose
Lower pump pressure, torque, and drag in water-based drilling fluids and sweeps—improving hydraulics, hole cleaning, and rate of penetration.
Options
Anionic, cationic, and hybrid FRs for varied water chemistries
Rapid-hydrate and high-brine-tolerant formulations
Outcome
Improved circulation efficiency, reduced energy demand, and smoother drilling performance from spud to TD.
SDS/TDS: Available on request →
Purpose
Improve pumping efficiency and pressure management in slickwater and hybrid jobs.
Options
Anionic, cationic, and hybrid FRs matched to water quality (TDS, hardness, temperature)
Rapid‑hydrate or high‑brine‑tolerant selections
Outcome
Efficient treating pressures and smoother operations from zipper to flush.
SDS/TDS: Available on request →
Purpose
Stabilize sensitive formations and minimize fines migration during stimulation.
Options
KCl substitutes
Quaternary amine packages
Low‑dose additives for high‑TDS waters
Outcome
Protect formation integrity and preserve clay stabilization.
SDS/TDS: Available on request →
Purpose
Reduce surface tension, enhance fluid recovery, and aid early‑time production.
Options
Nonionic blends
Microemulsions and mutual solvents
Hydrocarbon‑compatible packages for diverse crudes
Outcome
Improved load recovery and cleaner hand‑over to production.
SDS/TDS: Available on request →
Purpose
Manage foam in frac fluids, flowback, and production tanks to stabilize operations, protect equipment, and keep separation predictable.
Options
Defoamers / Antifoams: silicone and non-silicone packages for rapid knockdown or persistent control
Process-tuned blends: shear- and temperature-stable formulas compatible with common frac chemistries
Application modes: continuous dosing or batch/slugs for surge events and tank carryover
Outcome
Fewer level upsets and trips, cleaner separators and tanks, and reduced carry-over/under for smoother flowback and processing.
SDS/TDS: Available on request →
Purpose
Mitigate souring risks during pump‑down and flowback; protect people and equipment.
Options
Triazine and non‑triazine technologies
Programs sized for mix water, pits, and flowback
SDS/TDS: Available on request →
Purpose
Control microbial activity (SRB/MIC) in mix water and lines; protect fracture chemistry and equipment.
Options
Fast‑kill and preservative biocides
Programs aligned to contact time and water quality
SDS/TDS: Available on request →
Purpose
Prevent near‑wellbore and facility scale post‑frac.
Options
Squeeze‑friendly inhibitors
High‑TDS/high‑temperature selections
SDS/TDS: Available on request →
Purpose
Manage foam in surface equipment and tanks during completions and flowback.
Options
Defoamers and antifoams compatible with frac fluids
SDS/TDS: Available on request →
What they do
Separate produced water dispersed in crude by reducing interfacial tension so droplets coalesce and drop out.
Benefits
Reduce need for heat treatments
Improve oil composition/specs
Reduce heavy tank‑bottom build‑up and related maintenance
Cleaner conditions for heaters, FWKOs, and injection equipment
Examples
Nonionic and resin‑based demulsifiers tuned to your crude/water profile
SDS/TDS: Available on request →
What they do
Remove oil from produced/disposal water to help meet discharge or reinjection quality targets.
Options
Polymeric reverses — for high‑volume water treatment, efficient clarification and reduced hauling
Zinc‑based reverses — for rapid treatment when retention time is limited
Notes
Our lineup covers fast‑acting, shear‑tolerant, and temperature‑compatible products for a wide range of waters.
SDS/TDS: Available on request →
Use when
Water analysis shows scaling tendency (e.g., CaCO₃, CaSO₄, BaSO₄, SrSO₄) in downhole or surface equipment.
Options
Polyphosphonates — suited to higher bottom‑hole temperatures; compatible with squeeze programs
High‑salinity inhibitor (S‑3100) — effective in brines where others underperform
Phosphates (standard duty) — economical option where conditions are moderate
Benefits
Maintain flow paths and separator efficiency
Reduce pigging and acid jobs
SDS/TDS: Available on request →
Challenges addressed
Sweet or sour (H₂S, CO₂), and oxygen‑related corrosion. Varies from mild to severe across Wyoming and surrounding basins.
Options
Oil‑soluble or water‑soluble inhibitors based on oil‑to‑water ratio
Surfactant‑containing formulas to help keep systems clean of deposits and solids build‑up
Benefits
Reduce pulling costs, equipment failures, and production loss
Pair with coupon monitoring for measurable MPY improvements
SDS/TDS: Available on request →
Why combine?
Treat both risks with one product and fewer pumps/fittings on site.
Options
Oil‑soluble and water‑soluble combinations
Programs aligned to fluids, temperature, and scale types
Benefit
Simplifies treatment footprint and lowers cost to operate
SDS/TDS: Available on request →
SDS/TDS: Available on request →
Share your fluids, temperatures, and any lab/production data. We’ll propose a practical plan and dosage range.
